Stand Holder Stereo
Stand Holder Stereo
![]() |
Map] 5.1 surround sound technology design room - surround sound, mixer, audio - HC Network broadcasting industry
Writer Mr. Lin Jiangjun, the Central People's Broadcasting Radio Recording Arts Department of Senior Engineer.
Keywords: 5.1 surround sound technology design
Note: the Central People's Radio Concert Hall at the end of 2004 started the recording control room of the renovation project will Stereo Recording control room transformed into surround sound audio control room, now the room has been put into use. Was responsible for Organization Implementation of the reconstruction project author surround sound recordings on the control room for process design, equipment selection, etc. were summarized consolidation is expected to carry surround sound technology to provide reference counterparts.
National Radio Hall recording control room is mainly used to record the original stereo programs to meet the needs of surround sound recording program, and Taiwan in the transformation of decision to Make Surround sound the main program, while programming the recording compatible stereo control room.
Design considerations Current 5.1 surround sound control room in one of the few, very few can learn from design data. Our main consideration in the design of several areas:
1. Craft to ITU-R BS.775-1 standard for the design basis.
2. Acoustic sound control room acoustic to meet technical requirements, such as reverberation time RT60 = 0.3? .1 S (63Hz ~ 8kHz), room noise no higher than NR-20 and so on.
3. Functions to: a large orchestra pickup surround sound, multi-track recording, surround sound mixdown and mastering the production; recording a large pipe organ music surround sound; in the whole recording process for all digital signal storage and processing; surround sound and stereo compatible, and the same program and stereo surround sound effects real-time comparison; real-time Monitor The situation inside the Concert Hall, with convenient internal communication and communication functions; recording control room, sound reinforcement room, master computer rooms and audio database to exchange data between the (analog and digital); by lifting the microphone, rod floor microphone stand and high-quality micro-capacitor microphone and stage large-scale symphony orchestra performances, recording results in ensuring the premise of guaranteed performance visual effects; be the engine room of the video and audio signals sent to neighboring rooms surround sound pre-trial hearing conducted monitoring; to the engine room of the video and audio signal sent to monitor the pitch and the concert hall monitor; multi-party teleconferencing; receiver Cable television Signal, and so on.
Based on the above considerations, we will be divided into the control room, the entire system inside and outside the control room (the Hall-house) in two parts. Internal Process Design
Hall Control room outside of technology design process is divided into two parts, electric box and microphone.
Electrical box design process Concert Hall stage in the front, middle and rear left and right, each set 3 to box, divided into the craft supply box, back box and the microphone box to send a total of 6 groups. Each group has five microphone jacks, two power outlets and two-way box to send back output. Another apron with one side also the AV outlet box to provide external playback and conventional TV signals Studio Studio monitor, so you can replay the concert hall to the sound source and the remote television network meeting.
Microphone design point Concert Hall stage and hanging internal microphone into two parts, you can also add a wireless microphone as needed.
(1) hanging microphone part of the
Taking into account the long distance transmission hanging microphone signal by the venue Light , A larger power supply and other factors, it will be hanging ceiling microphone to the microphone trace metal tube closed, and be well grounded, to minimize the interference. The same time, the microphone Amplifiers Some moved to the roof, the microphone will pick up the weak signal in situ amplification and encoded into a digital multi-channel serial bit stream (ie MADI signal), by two 75 in Coaxial cable Return the control room. MADI coaxial cable signal theory of transmission distance 50m, 40m length of the line actually thrown around, ensure the hanging microphone signal transmission quality. The microphone box MADI cable can be the last of its 56-channel mixer on a microphone channel to transmit control signals to achieve the level of the microphone, remote control interface and phantom power. Lifting the microphone point performance according to the modern symphony orchestra seating spots. To meet the practical needs of the different microphone pickup, the band hanging in front of a row of cardioid directional microphone, as the standard of the main microphone pickup AB; In addition, the famous conductor DECCA tree hanging behind the microphone arrays; also prepared a ATMOS5.1 surround sound microphone, surround sound as a single point of pickup to add.
Figure 1 stage and the location of microphone holders hanging layout
Standard microphone using the form AB, mainly taking into account the standard AB stereo recording in a sense of degree of respect and integration advantages of relatively prominent. Keep the form of AB system, microphone, on the one hand you can continue to maintain the advantages of tape recording of AB system; the other hand, a variety of recording formats in the fabric, you can be added as the main and auxiliary microphone. DECCA DECCA Tree microphone array is the company's proven, were all highly praised recordings pickup standard, has been Expert They focus of the study, in its basic structure of T-derived variety of recording formats, selected according to the actual situation. The hanging of the main microphone while still using T-rack receiver rack, but is different in that rack installed six microphones: the forefront of MS system is a pair of stereo microphone, face the stage panoramic pick; from two 0.5m side installation of two forward a heart-shaped condenser microphone, in front of the reverberation as surround sound source; in both sides of T-rack installation and central angle of about 135? the heart-shaped condenser microphone, rear surround sound as reverberation source. T-Rack using fine wire and through arm lift, if it is pick up a regular stereo source, can be easily replaced with standard or large DECCA tree recording AB, Small AB, MS, ORTF format, etc.. ATMOS5.1 surround sound microphone pickup system from Germany's R & D surround sound pre-amplifier, for the entire analog circuit design, can provide all current standard surround sound recording. It uses a fixed "large" type microphone stand, microphone through the cable and supporting pre-amplifiers. The microphone amplifier using the electric motor control to gain control of the central control knob can be guaranteed five simultaneous adjustment of the gain of the microphone, microphone amplifier can be directly carried out in surround sound microphone gain adjustment, distribution and output bus, audio and video electronic broadening , ultra-low sound signal and regulation, surround sound and stereo monitor, such as the conversion and operation of appropriate
About the Author
The e-commerce company in China offers quality products such as Metal casting , Sheet Metal cabinet Supplier, and more. For more , please visit machining parts supplier today!
|
|
K&M Stand Pencil Holder $1.99 K&M Stand Pencil Holder |
|
|
AmScope Ball-Bearing Boom Stand For Stereo Microscopes with Focusing Rack $293.96 This is a ball-bearing dual-arm heavy-duty boom stand for stereo microscopes. The ball-bearing design allows users to make horizontal adjustment at the touch of a finger. The holder ring of the focusing rack is 3" (76mm) in diameter. This boom stand weighs about 40 lbs. It is brand new in factory sealed box. Type: Microscopes |
|
|
SwirlyGig Microphone Stand Drink Holder $9.99 SwirlyGig Microphone Stand Drink Holder |
|
|
Dunlop Microphone Stand Pick Holder $3.99 Dunlop Microphone Stand Pick Holder |
|
|
Wedgie Mic Stand Pick Holder $3.99 Wedgie Mic Stand Pick Holder |
|
|
Swirlygig Microphone Stand Drink Holder $13.99 SwirlyGig Microphone Stand Drink Holder |
|
|
Sony ECM-MS957 Stereo Microphone $198.99 11.50 oz 115 dB 50 Hz to 18 kHz 600 Ohm < 1% Directive angle 90 or 120 (switchable) Dynamic Range: 90dB Effective Output Level: -45.8dBm <+->3dB (0dB=1mW/Pa, 1kHz) Open Circuit Output Voltage: -42dB <+->3dB (0dB=1mW/Pa, 1kHz) Power Requirements: 1 x DC 1.5V from AA Battery Battery Life: Approx. 2,000 hours with Sony Manganese Battery Compatible Models: MZ-RH10 MZ-RH910 TCD-D100 WM-GX221 ECM-MS957 Stereo Microphone Detachable cable Stand Holder Windscreen Carrying case Sony's ECM-MS957 One-Point Stereo Microphone is ideal for the MD Walkman and DAT Walkman Portable Stereos. Featuring a One-Point Stereo Design, Mid/Side (MS) Capsules with a Switchable Pickup Angle, a Rotating Mid Capsule, a Cannon XLR Connector, an Oxygen-free Copper (OFC) Litz cord, and a Gold-plated L-shaped Stereo Mini plug, the ECM-MS97 is for the advanced amateur and professional to use for instrumental recording. Cable Cable 79" ECM-MS957 ECM-MS957 Stereo Microphone ECMMS957 Electret Handheld Microphone Mini-phone Gold Plated On/Off Sony Sony Corporation Stereo XLR www.sony.com |
|
|
Blast Netbook Cooling Stand with Stereo Speakers - notebook stand with cooling fan and stereo speakers $29.99 PC Treasures Blast Netbook Cooling Stand with Stereo Speakers - Notebook stand with cooling fan and stereo speakers - red |
|
|
Camera Flash Hot Shoe Holder & Light Stand Mount with umbrella holder $14.99 Camera Flash Hot Shoe Holder & Light Stand Mount with umbrella holder |
|
|
Roland CS-15R STEREO MICROPHONE $129 For serious field recording, the CS-15R cardioid-type stereo microphone is a great match for the Roland CD-2e SD/CD recorder. For portability and convenience, the CD-2e supplies the power to the mic. Bundled with the microphone are a desktop stand, a hand-held mount, and a windscreen.Element: Electret CondenserOpen Circuit Sensitivity: -41.5 ñ4 dB (0 dB=1 V/ 1 Pa, 1 kHz)Polar Pattern: Uni Directional x 2Impedance: 1,300 ohmsFrequency Response: 200 to 17,000 HzMaximum Input S.P.L119dB SPL (3% THD at 1kHz)Battery: LR44 type, 1.5VButtery Current: 0.6mABattery Life: 200 Hours (continuous use)Cable Length: 3 m/10 feetPlug: 1/4 inch Phone PlugAccessories: Owner's Manual, Wind Screen, Carrying Case, Microphone Stand, Microphone Holder, Screw Adaptor, LR44 Battery |
|
|
Roland Cs-15R Stereo Microphone $129 For serious field recording, the CS-15R cardioid-type stereo microphone is a great match for the Roland CD-2e SD/CD recorder. For portability and convenience, the CD-2e supplies the power to the mic. Bundled with the microphone are a desktop stand, a hand-held mount, and a windscreen.Element: Electret CondenserOpen Circuit Sensitivity: -41.5 4 dB (0 dB=1 V/ 1 Pa, 1 kHz)Polar Pattern: Uni Directional x 2Impedance: 1,300 ohmsFrequency Response: 200 to 17,000 HzMaximum Input S.P.L119dB SPL (3% THD at 1kHz)Battery: LR44 type, 1.5VButtery Current: 0.6mABattery Life: 200 Hours (continuous use)Cable Length: 3 m/10 feetPlug: 1/4 inch Phone PlugAccessories: Owner's Manual, Wind Screen, Carrying Case, Microphone Stand, Microphone Holder, Screw Adaptor, LR44 Battery |
|
|
Blast Netbook Cooling Stand - Notebook stand with cooling fan and stereo speakers $22.99 PC Treasures Blast Netbook Cooling Stand - Notebook stand with cooling fan and stereo speakers |
|
|
Blast Netbook Cooling Stand - notebook stand with cooling fan and stereo speakers $19.99 PC Treasures Blast Netbook Cooling Stand - Notebook stand with cooling fan and stereo speakers - navy |
|
|
Printek / FLIP VIEWING STAND HOLDER / ST-IPAD2-BK $47.62 Printek - FLIP VIEWING STAND HOLDER - ST-IPAD2-BK |
|
|
Dunlop Microphone Stand Pick and Slide Holder $4.99 Dunlop Microphone Stand Pick and Slide Holder |
|
|
Quik-Lok X Stand Laptop Holder $99.99 Quik-Lok X Stand Laptop Holder |
|
|
SwirlyGig SwirlyBigger Microphone Stand Drink Holder $11.99 SwirlyGig SwirlyBigger Microphone Stand Drink Holder |
|
|
Peterson Pitch Holder VS Tuner Stand Mount $24.99 Peterson Pitch Holder VS Tuner Stand Mount |
|
|
O-Tray Microphone Stand Tray and Drink Holder $12.95 O-Tray Microphone Stand Tray and Drink Holder |
|
|
K&M File Holder/Adaptable Instrument Stand $8.5 K&M File Holder/Adaptable Instrument Stand |
|
|
Gibraltar T-drum key with clip stand holder $5.99 Gibraltar T-drum key with clip stand holder |
|
|
O-Tray Microphone Stand Tray And Drink Holder $12.95 O-Tray Microphone Stand Tray and Drink Holder |
|
|
Dunlop Microphone Stand Pick And Slide Holder $7.49 Dunlop Microphone Stand Pick and Slide Holder |
|
|
Peterson Pitch Holder Vs Tuner Stand Mount $24.99 Peterson Pitch Holder VS Tuner Stand Mount |
|
|
Gibraltar T-Drum Key With Clip Stand Holder $5.99 Gibraltar T-drum key with clip stand holder |
|
|
Swirlygig Swirlybigger Microphone Stand Drink Holder $11.99 SwirlyGig SwirlyBigger Microphone Stand Drink Holder |
|
|
Adjustable Table Mount Holder Stand for PSP $10 Adjustable Table Mount Holder Stand for PSP |
|
|
Speaker Lapdesk N700 - notebook stand with cooling fan and stereo speakers $87.99 Logitech Speaker Lapdesk N700 - Notebook stand with cooling fan and stereo speakers |
|
|
Twine Holder Stand $16.95 Twine Holder Stand Organize Your Garden & Home Make your patio or living area complete with the Twine Holder and Stand, from Achla. Each one is crafted of durable aluminum and powder coated to resist weathering. The Twine Holder is a great organizational tool, and the stand, sold here, helps you keep it in one place. This stand also works well in tons of other applications. Special Features Roman bronze powder coated finish Made of wrought iron Travel back to colonial times with this traditional twine holder Twine basket sold separately, G30079 Dimensions: 10.75" H x 6.5" W x 6" D Low Price Guarantee Achla Designs, a Garden Accessories company, emphasizes unique, hand forged, wrought iron, European furnishings for the home and garden. Items range from small hooks and brackets to large pavilions and arbors. They also offer birdbaths, birding & garden pole systems, trellises, statuary, composting products, and wood and metal furniture. In 2004, Achla Designs introduced the Williamsburg Collection, offering reproductions as well as 17th and 18th century inspired designs for the contemporary home. Achla Designs continues to add beautiful and unique items year after year, resulting in an unusually large product line. |
|
|
Desk Top Holder - Bar code scanner stand $18.99 Motorola Desk Top Holder - Bar code scanner stand |
|
|
Used Roland Cs-15R Stereo Microphone $117.39 For serious field recording, the CS-15R cardioid-type stereo microphone is a great match for the Roland CD-2e SD/CD recorder. For portability and convenience, the CD-2e supplies the power to the mic. Bundled with the microphone are a desktop stand, a hand-held mount, and a windscreen.Element: Electret CondenserOpen Circuit Sensitivity: -41.5 4 dB (0 dB=1 V/ 1 Pa, 1 kHz)Polar Pattern: Uni Directional x 2Impedance: 1,300 ohmsFrequency Response: 200 to 17,000 HzMaximum Input S.P.L119dB SPL (3% THD at 1kHz)Battery: LR44 type, 1.5VButtery Current: 0.6mABattery Life: 200 Hours (continuous use)Cable Length: 3 m/10 feetPlug: 1/4 inch Phone PlugAccessories: Owner's Manual, Wind Screen, Carrying Case, Microphone Stand, Microphone Holder, Screw Adaptor, LR44 Battery |
|
|
AmScope Ball-bearing Boom Stand for Stereo Microscopes $244.02 This is a ball-bearing, dual-arm, heavy-duty boom stand for stereo microscopes. This boom stand weighs about 38 lbs. It is brand new in factory sealed box. Type: Microscopes |


US $14.99













