Fisher Isotemp
Fisher Isotemp
 |
 Fisher ISOTEMP DIG DRY BATH 2BLK 11715125D 115V NEW  US $415.00
|
 FISHER SCIENTIFIC ISOTEMP UC25CWFMS 245 CU FT LAB FREEZER US $899.99
|
 Incubator Fisher Isotemp Plus US $5,078.70
|
 Freezer Fisher Scientific Isotemp US $2,440.35
|
 Fisher Scientific Isotemp Heated Water Bath 5 Liter 5L Take A Look US $350.00
|
 Isotemp Incubator Fisher Scientific US $1,900.00 |
 Fisher Scientific Isotemp 637G Laboratory Oven US $899.00
|
 Fisher Isotemp 2 block Dry Bath heater 11 718 2 US $179.99
|
 FISHER SCIENTIFIC ISOTEMP 11 700 49S MAGNETIC STIRRER PLATE US $189.00
|
 Fisher Scientific Isotemp 110 Water Bath 15 460 10 US $491.18
|
 FISHER ISOTEMP INCUBATOR MODEL 655D US $479.99
|
 FISHER ISOTEMP OVEN 200 SERIES MODEL 230G US $479.99
|
 FISHER ISOTEMP OVEN 200 SERIES MODEL 255D US $479.99
|
 FISHER ISOTEMP OVEN 300 SERIES MODEL 350D US $399.99
|
 Fisher Scientific Isotemp 220 Dig Ctrl 20L Water Bath US $749.95
|
 Fisher Scientific Isotemp 3013D Recirculator Water Bath US $2,750.00
|
 FISHER SCIENTIFIC ISOTEMP 3013 REFRIGERATED HEATED RECIRCULATOR WATER BATH 3013D US $699.96
|
 Fisher Scientific Isotemp 2150 US $295.00
|
 Fisher Isotemp 205 Heated Bath US $800.00
|
 Fisher Isotemp 228 Heated Bath US $599.00
|
 Fisher IsoTemp Heating Circulator Model 3016HS US $1,260.00
|
 FISHER SCIENTIFIC ISOTEMP PHARMACEUTICAL REFRIGERATOR MOD 326R 2 WORKING US $810.00
|
 Fisher Scientific Isotemp 205 US $385.00
|
 FISHER SCIENTIFIC 285 285A ISOTEMP VACUUM LAB OVEN US $1,750.00
|
|
|
Fisher Scientific Ceramic Top for Isotemp Digital Stirring Hotplate, 7 x 7 $169.85 Fisher Scientific Ceramic Top for Isotemp Digital Stirring Hotplate, 7" x 7" |
|
|
Fisher Scientific Isotemp Digital Stirring Hotplate, Ceramic Top, 120V $702.27 Features of the Fisher Scientific Isotemp Digital Stirring Hotplate: Digital control. Ceramic top. Temperature range: 30° to 540°C Speed range 60-1200rpm; 120V 60Hz49sh. Heating surface area: 7 x 7in. Display: LED. |
|
|
Fisher Scientific Isotemp General-Purpose Freezer, 20.6 cu. ft $1749 Features of the Fisher Scientific Isotemp General-Purpose Freezer: Equipped with manual defrost for sensitive biological sample storage. CFC-free R404A refrigerant Durable, textured white enamel-coated steel exterior Foamed-in polyurethane insulation One solid hinged door opens to a 90° angle, closes with a gentle push Four adjustable legs ensure cabinets are level on irregular floors Adjustable temperature from -20° to -12°C, with ±3°C stability Yellow warning label on door "Not For Flammable Material Storage" For 115V 60Hz. Equipped with NEMA 5-15P line cord plug; requires NEMA 5-15R receptacle. Warranty: 13 months, parts and labor Interior Dimensions: 22.5 x 27 x 57 in. (57 x 69 x 145cm) Number of shelves: 4 fixed Exterior Dimensions: 28.5 x 32 x 70.25 in. (72 x 81 x 178cm) |
|
|
Fisher Scientific Isotemp 5.8' Single Ir 3-gas Incubator, 115V $13501 Fisher Scientific Isotemp 5.8' Single Ir 3-gas Incubator, 115V Includes: Tank switcher and switchover indicator; CO2 sample port on front, 1 in. (2.5cm) access port on rear for probes or instrumentation leads; electrical outlet on rear. Choice of CO2 or Three-Gas Models (CO2/O2/N2). Select models include relative-humidity control with operating range to 98% RH. Choose from models with Thermal Conductivity (TC) or Infrared (IR) CO2 sensor. Operating temperature range, 5° above ambient to 60°C; temperature stability, ±0.1°C at 37°C; uniformity, ±0.2°C at 37°C. Operating CO2 range, 0 to 20%; ±0.1% stability; uniformity, ±0.2%. Operating 02 range (Three Gas Incubators only), 0 to 40%; ±0.1% stability; ±0.2%uniformity. Automatic gas shutoff when door is opened; CO2 recovers to 5% in |
|
|
Fisher Scientific Isotemp Lab Refrigerator, 38 cu. ft with Recorder & Alarm $7082.57 Features of the Fisher Scientific Isotemp Lab Refrigerator: Adjustable temperatures from 1° to 12°C, with ±3°C average stability. Exterior-mounted 1/2 in. LED displays temperature with 1°C resolution. Automatic defrost. White enamel- or epoxy-coated steel cabinets. Lockable solid-steel doors have hinge mechanism that holds doors open at 95° angle, close with a gentle push. Thermopane glass doors provide easy access and visual inventory control; sliding doors require no swing-out space—a valuable benefit in high traffic or narrow areas. CFC-free (R134A) refrigerant. White epoxy, powder-coated steel wire shelves (up to 46.7 sq. ft.), adjustable on 1 in. (2.5cm) centers. Interior fluorescent lighting with exterior light switch standard on 27 cu. ft. (765L) and larger models. Keyed ON/OFF power switch. Four adjustable legs ensure cabinets are level on irregular floors. Microprocessor temperature control. Certifications: UL listed, CSA approved. Warranty: 13 months parts and labor. Seven-day Selectable Temperature Recorder with Alarm: Panel-mounted, factory installed. 6 in. dia. (15.2cm) chart size. User-selectable temperature ranges. Single-point calibration; individually calibrated against equipment with calibration certified traceable to NIST. Supplied with 60 charts and 7-day scale. Digital alarm display with minimum/maximum setpoints, audible alarm, and 24V, 0.5A SPST N.O. relay contacts. Product Specifications: Interior D x W x H: 25.5" x 41" x 55" (65 x 104 x 140cm). Number of Shelves: 8 half width. Exterior L x W x H: 31.5" x 44" x 78" (80 x 112 x 198cm). Net Weight: 421 lb. (191kg). Amps/Breaker: 11/15. 2 sliding glass lockable doors. |
|
|
Fisher Scientific Isotemp Flammable-Materials Storage Refrigerator, 50 cu. ft $5393.62 Features of the Fisher Scientific Isotemp Flammable-Materials Storage Refrigerator: Adjustable temperatures from 1° to 10°C, depending on model. Capacities: 20.6, 30, and 50 cu. ft. (583, 850, and 1420L). 30 and 50 cu. ft. (850 and 1420L) models feature digital temperature display in 0.1° increments, °C or °F, and keyed power switches. Manual defrost. Safety Features Orange warning label on front. Sparkproof interiors separate contents from compressor and motor. Compressors have enclosed overloads, relays, and thermostats that prevent sparks from escaping during door opening and closing. Static hot-wall condensers and evaporators are free of electric fans. Magnetic door gaskets provide airtight seals that insulate and prevent release of hazardous fumes. Top-mounted hydraulic thermostat and door stop. Construction White, baked-on polyester enamel exteriors. CFC-free polyurethane foam insulation and refrigerant. Solid door(s) with key lock. White epoxy-coated steel interiors with ABS plastic door liner. Alarms (30 and 50 cu. ft. models only) Panel-mounted, factory installed. Digital display with minimum/maximum setpoints, audible alarm, and 24V, 0.5A SPST N.O. relay contacts. Seven-day Selectable Temperature Recorder (30 and 50 cu. ft. models only) Panel-mounted, factory installed. 6 in. dia. (15.2cm) chart. User-selectable temperature ranges. Single-point calibration; individually calibrated against equipment with calibration certified traceable to NIST*. Supplied with 60 charts and 7-day scale. Other Features 2 solid hinged doors. Temperature range/stability: 1° to 8°C (34° to 46°F)/±4° Interior: 26.5 x 45.75 x 59 in. 8 adjustable shelves. Exterior: 34.25 x 52 x 77.25 in. 390 lbs. |
|
|
Fisher Scientific Isotemp Lab Refrigerator, 72 cu. ft $11660 Features of the Fisher Scientific Isotemp Lab Refrigerator: Adjustable temperatures from 1° to 12°C, with ±3°C average stability. Exterior-mounted 1/2 in. LED displays temperature with 1°C resolution. Capacities from 27 to 72 cu. ft. (765 to 2040L). Automatic defrost. White enamel- or epoxy-coated steel cabinets. Lockable solid-steel doors have hinge mechanism that holds doors open at 95° angle, close with a gentle push. Thermopane glass doors provide easy access and visual inventory control. CFC-free (R134A) refrigerant. White epoxy, powder-coated steel wire shelves (up to 46.7 sq. ft.), adjustable on 1 in. (2.5cm) centers. Interior fluorescent lighting with exterior light switch standard on 27 cu. ft. (765L) and larger models. Keyed ON/OFF power switch. Four adjustable legs ensure cabinets are level on irregular floors. Microprocessor temperature control. Certifications: UL listed, CSA approved. Warranty: 13 months parts and labor. Product Specifications: Interior D x W x H: 28.5" x 72" x 55" (72 x 183 x 140cm). Number of Shelves: 12 third width. Exterior L x W x H: 35" x 75" x 78" (89 x 190 x 198cm). Net Weight: 704 lb. (319kg). Amps/Breaker: 12/15. 3 hinged glass doors. |
|
|
Fisher Scientific Isotemp Lab Freezer, 74 cu. ft. $18428.19 Features of the Fisher Scientific Isotemp Lab Freezer: Adjustable temperatures between -40° and -18°C (327L Series), -29° and -18°C (all others). Capacities from 23.1 to 74.0 cu. ft. (654 to 2096L). Average temperature stability: ±3°C. Exterior-mounted digital display with 0.1°C resolution. Automatic defrost. White enamel-coated steel exterior. Anodized aluminum interior. CFC-free refrigerant and insulation. White epoxy-coated steel-wire shelves (15.6 to 47.2 sq. ft.), adjustable in 1/2 in. increments. Incandescent lighting with door-activated light switch. Hinged doors with keylocks. Keyed ON/OFF powerswitch. Panel-mounted, factory installed alarm. Digital display with minimum/maximum setpoints, audible alarm, and 24V, 0.5A SPST N.O. relay contacts. Panel-mounted, factory installed temperature recorder. 6 in. dia. (15.2cm) chart. User-selectable temperature ranges. Single-point calibration; individually calibrated against equipment with calibration certified traceable to NIST* Supplied with 60 charts and 7-day scale. 3 hinged solid doors. 9 shelves. Interior: 28 x 74 x 60 in. (71 x 188 x 152cm) Exterior: 33.5 x 78 x 84.5 in. (85 x 198 x 215cm) -29° to -18°C 115V 60Hz, NEMA 5-20P (10/20) |
|
|
Fisher Scientific Isotemp Lab Refrigerator, 72 cu. ft with Recorder & Alarm $14869.12 Features of the Fisher Scientific Isotemp Lab Refrigerator: Adjustable temperatures from 1° to 12°C, with ±3°C average stability. Exterior-mounted 1/2 in. LED displays temperature with 1°C resolution. Capacities from 27 to 72 cu. ft. (765 to 2040L). Automatic defrost. White enamel- or epoxy-coated steel cabinets. Lockable solid-steel doors have hinge mechanism that holds doors open at 95° angle, close with a gentle push. Thermopane glass doors provide easy access and visual inventory control. CFC-free (R134A) refrigerant. White epoxy, powder-coated steel wire shelves (up to 46.7 sq. ft.), adjustable on 1 in. (2.5cm) centers. Interior fluorescent lighting with exterior light switch standard on 27 cu. ft. (765L) and larger models. Keyed ON/OFF power switch. Four adjustable legs ensure cabinets are level on irregular floors. Microprocessor temperature control. Certifications: UL listed, CSA approved. Warranty: 13 months parts and labor. Seven-day Selectable Temperature Recorder with Alarm: Panel-mounted, factory installed. 6 in. dia. (15.2cm) chart size. User-selectable temperature ranges. Single-point calibration; individually calibrated against equipment with calibration certified traceable to NIST*. Supplied with 60 charts and 7-day scale. Digital alarm display with minimum/maximum setpoints, audible alarm, and 24V, 0.5A SPST N.O. relay contacts. Product Specifications: Interior D x W x H: 28.5" x 72" x 55" (72 x 183 x 140cm). Number of Shelves: 12 third width. Exterior L x W x H: 35" x 75" x 78" (89 x 190 x 198cm). Net Weight: 704 lb. (319kg). Amps/Breaker: 12/15. 3 hinged glass doors. |
|
|
Fisher Scientific Isotemp General-Purpose Refrigerator/Freezer, 17.9 cu. ft $3749 Features of the Fisher Scientific Isotemp General-Purpose Refrigerator/Freezer: Ideal for storing nonvolatile reagents, samples and specimens. Temperature range from 2° to 13°C (refrigerator), -18° to -10°C (freezer). Total capacity: 17.9 cu. ft. (507L). Refrigerator capacity: 12.9 cu. ft. (365L). Freezer capacity: 5.0 cu. ft. (142L). User-switchable to manual or automatic defrost. Controls at front of refrigerator for easy access. Separate adjustment of refrigerator and freezer temperatures. CFC-free R134-A rrefrigerant. Yellow warning label reads: "Laboratory Refrigerator". Foamed polyurethane insulation ensures temperature uniformity. Textured white enamel steel exterior resists marking. Refrigerator has two white vinyl-coated—steel slide-out adjustable shelves, two tinted slide-out bottom drawers, four door shelves. Freezer has one compartment and two door shelves. Two adjustable, two fixed rollers on bottom for easy installation and leveling. Exterior dimensions: 303/4L x 30W x 66 in.H (78 x 76 x 168cm). Requires air clearance of 3 in. (7.6cm) around top, back, and sides. Shipping weight: 240 lb. (109kg). For 115V, 60Hz. Has NEMA 5-15 plug, requires NEMA-15 receptacle. Certifications: UL/cUL listed. Warranty: 13 months parts and labor. |
|
|
Fisher Scientific Isotemp Standard Lab Incubator, Small Model $3029 Features of the Fisher Scientific Isotemp Standard Lab Incubator: Incubators with gravity flow circulation provide accurate, efficient heating for routine laboratory procedures: drying and staining of slides, paraffin embedding, tissue culture work, incubation of antibody tests, microbiological determinations, crystallization studies, and more. Electrical receptacle inside (5A at 120VAC) to plug in a stirrer, shaker, or other apparatus. Small (2.5 cu. ft.) and medium (3.75 cu. ft.) incubators each come with one plated-steel shelf; large (5.0 cu. ft.) incubator comes with two shelves. Easy to operate: * Microprocessor control. * Controls are conveniently located at the top of the incubator chamber. * Keypad with arrow keys to increase or decrease setpoint temperature in 0.1°C increments. * Over-temperature value is automatically set at 3°C above set-point. * PID controller comes with fixed parameters so no tuning is required. * Circuit breaker protects incubator from power surges; battery backup. * Designed to stack two units. Big three-character LED display: * Digits display actual temperature to nearest 0.1°C. * Display shows current value for setpoint temperature. * HEAT indicator light cycles on and off to show when incubator heaters are on. * ALARM indicator lights up if temperature exceeds overtemperature limit; backup controller maintains temperature at 3°C above setpoint; safety backup built into software. Small, medium, and large workload capacities: * Available in three chamber capacities. * Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement. * Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds 11 shelves. Low-maintenance incubators with inner and outer doors: * Cabinet has durable, enamel-coated steel exterior. * Extruded aluminum trim has acrylic powder coating. * Chamber is easy-to-clean stainless steel. * Low-watt-density heater elements are designed for long life. * Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss. * Outer door opens to 180° for unhindered access and features two grabber-type latches. * Inner door is tempered glass. * Steel shelves are 173/8 in. wide and 163/4 in. front-to-back (44 x 42.5cm). * Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation. * Certifications: CSA approved. * Warranty: One year. Product Specifications: * Capacity (Chamber Volume): 2.5 cu. ft. (70.8L). * Temperature Range: 30° to 75°C (86° to 167°F). * Average Uniformity: ±0.7°C at 37°C. * Resolution: 0.1°C. * Control Sensitivity: ±0.1°C. * Recovery: 2 min. * Air Changes per Hour: 6. * BTU per Hour (75°C): 290. * Exterior L x W x H: 23.5 x 26 x 26 in. (60 x 66 x 66cm). * Interior D x W x H: 18 x 18 x 13.5 in. (46 x 46 x 34cm). * Electrical Requirements: 120V 60Hz, 260w |
|
|
Fisher Scientific Isotemp Standard Lab Incubator, Medium Model $3434.25 Features of the Fisher Scientific Isotemp Standard Lab Incubator: Incubators with gravity flow circulation provide accurate, efficient heating for routine laboratory procedures: drying and staining of slides, paraffin embedding, tissue culture work, incubation of antibody tests, microbiological determinations, crystallization studies, and more. Electrical receptacle inside (5A at 120VAC) to plug in a stirrer, shaker, or other apparatus. Small (2.5 cu. ft.) and medium (3.75 cu. ft.) incubators each come with one plated-steel shelf; large (5.0 cu. ft.) incubator comes with two shelves. Easy to operate: * Microprocessor control. * Controls are conveniently located at the top of the incubator chamber. * Keypad with arrow keys to increase or decrease setpoint temperature in 0.1°C increments. * Over-temperature value is automatically set at 3°C above set-point. * PID controller comes with fixed parameters so no tuning is required. * Circuit breaker protects incubator from power surges; battery backup. * Designed to stack two units. Big three-character LED display: * Digits display actual temperature to nearest 0.1°C. * Display shows current value for setpoint temperature. * HEAT indicator light cycles on and off to show when incubator heaters are on. * ALARM indicator lights up if temperature exceeds overtemperature limit; backup controller maintains temperature at 3°C above setpoint; safety backup built into software. Small, medium, and large workload capacities: * Available in three chamber capacities. * Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement. * Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds 11 shelves. Low-maintenance incubators with inner and outer doors: * Cabinet has durable, enamel-coated steel exterior. * Extruded aluminum trim has acrylic powder coating. * Chamber is easy-to-clean stainless steel. * Low-watt-density heater elements are designed for long life. * Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss. * Outer door opens to 180° for unhindered access and features two grabber-type latches. * Inner door is tempered glass. * Steel shelves are 173/8 in. wide and 163/4 in. front-to-back (44 x 42.5cm). * Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation. * Certifications: CSA approved. * Warranty: One year. Product Specifications: * Capacity (Chamber Volume): 3.75 cu. ft. (106.2L). * Temperature Range: 30° to 75°C (86° to 167°F). * Average Uniformity: ±0.7°C at 37°C. * Resolution: 0.1°C. * Control Sensitivity: ±0.1°C. * Recovery: 2 min. * Air Changes per Hour: 4. * BTU per Hour (75°C): 360. * Exterior L x W x H: 23.5 x 26 x 33 in. (60 x 66 x 84cm). * Interior D x W x H: 18 x 18 x 20 in. (46 x 46 x 51cm). * Electrical Requirements: 120V 60Hz, 260w |
|
|
Fisher Scientific Isotemp Standard Lab Incubator, Large Model $3824.71 Features of the Fisher Scientific Isotemp Standard Lab Incubator: Incubators with gravity flow circulation provide accurate, efficient heating for routine laboratory procedures: drying and staining of slides, paraffin embedding, tissue culture work, incubation of antibody tests, microbiological determinations, crystallization studies, and more. Electrical receptacle inside (5A at 120VAC) to plug in a stirrer, shaker, or other apparatus. Small (2.5 cu. ft.) and medium (3.75 cu. ft.) incubators each come with one plated-steel shelf; large (5.0 cu. ft.) incubator comes with two shelves. Easy to operate: * Microprocessor control. * Controls are conveniently located at the top of the incubator chamber. * Keypad with arrow keys to increase or decrease setpoint temperature in 0.1°C increments. * Over-temperature value is automatically set at 3°C above set-point. * PID controller comes with fixed parameters so no tuning is required. * Circuit breaker protects incubator from power surges; battery backup. * Designed to stack two units. Big three-character LED display: * Digits display actual temperature to nearest 0.1°C. * Display shows current value for setpoint temperature. * HEAT indicator light cycles on and off to show when incubator heaters are on. * ALARM indicator lights up if temperature exceeds overtemperature limit; backup controller maintains temperature at 3°C above setpoint; safety backup built into software. Small, medium, and large workload capacities: * Available in three chamber capacities. * Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement. * Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds 11 shelves. Low-maintenance incubators with inner and outer doors: * Cabinet has durable, enamel-coated steel exterior. * Extruded aluminum trim has acrylic powder coating. * Chamber is easy-to-clean stainless steel. * Low-watt-density heater elements are designed for long life. * Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss. * Outer door opens to 180° for unhindered access and features two grabber-type latches. * Inner door is tempered glass. * Steel shelves are 173/8 in. wide and 163/4 in. front-to-back (44 x 42.5cm). * Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation. * Certifications: CSA approved. * Warranty: One year. Product Specifications: * Capacity (Chamber Volume): 5.0 cu. ft. (141.6L). * Temperature Range: 30° to 75°C (86° to 167°F). * Average Uniformity: ±0.7°C at 37°C. * Resolution: 0.1°C. * Control Sensitivity: ±0.1°C. * Recovery: 2 min. * Air Changes per Hour: 3. * BTU per Hour (75°C): 430. * Exterior L x W x H: 23.5 x 26 x 39 in. (60 x 66 x 99cm). * Interior D x W x H: 18 x 18 x 26.5 in. (46 x 46 x 67cm). * Electrical Requirements: 120V 60Hz, 320 |
|
|
Fisher Scientific Isotemp Ceramic Stirring Hotplate, 10 x 10, 120V 60Hz $749.34 Features of the Fisher Scientific Isotemp Ceramic Stirring Hotplate: Sleek, compact units offer dependability and value. Fit virtually anywhere in lab. Easy to set analog temperature control knob with graduated scale. LED display. Top plate and base design diverts liquids away from internal electronics. Safety warning system with visual alert protects user from accidental burns. Redundant temperature control systems for overtemperature protection. Incorporated base mount holds support rods up to 13mm diameter—ideal when using thermometers or pH probes. Variable analog stirring control to 1200rpm. INSTANT-ON feature begins stirring at low 60rpm to prevent splashing. Direct-drive motor/magnet system runs silently. Reflective white ceramic surface is acid- and alkali-resistant and easy to clean. Nonheating frame surrounds the heated ceramic plate for added protection. |
|
|
Fisher Scientific Isotemp Plus Lab Refrigerator, 49 cu. ft, Double Solid Door $7419 Features of the Fisher Scientific Isotemp Plus Lab Refrigerator: Temperature range from 1° to 12°C (33.8° to 53.6°F) with ±3° average stability; adjustable in °C or °F using interior control. Exterior-mounted 0.5 in. LED display with 0.1° temperature resolution. Automatic defrost. No recorder or alarm. Certifications: UL listed. Warranty: 13 months parts and labor. Interior D x W x H: 28" x 48" x 62". No. of Shelves: 8 shelves. Exterior D x W x H: 33.75" x 52" x 84.5". Shipping Weight: 659 lb. Electrical Requirements: 115V 60Hz. Construction: Grey enamel-coated steel cabinets, stainless-steel interiors. Solid doors are hinged, white enamel-coated steel. CFC-free R134A refrigerant and polyurethane insulation. Interior fluorescent lighting with exterior light switch. Keyed ON/OFF power switch. Four adjustable legs ensure cabinets are level on irregular floors (casters provided). |
|
|
Fisher Scientific Isotemp Basic Ceramic Hotplate, 7 x 7, 120V 60Hz $225.86 Features of the Fisher Scientific Isotemp Basic Ceramic Hotplate: Sleek, compact units offer dependability and value. Fit easily in hood or on benchtop. Easy and safe to use. Excellent for sample drying and general lab heating in environments between 4° to 40°C (39° to 104°F). Easy-to-set analog temperature control knob with graduated scale. LED display. Top plate and base design diverts liquids away from internal electronics. Safety warning system with visual alert protects user from accidental burns. Redundant temperature control systems for overtemperature protection. Incorporated base mount holds support rods up to 13mm diameter—ideal when using thermometers or pH probes. Temperature Range: 30° to 540°C (Ambient to 1004°F). Reflective white ceramic surface is acid- and alkali-resistant and easy to clean. Nonheating frame surrounds the heated ceramic plate for added protection. 5 degree increments. One year warranty. Includes: Detachable line cord, PTFE stir bar. |
|
|
Fisher Scientific Isotemp Basic Ceramic Hotplate, 4 x 4, 120V 60Hz $207.47 Features of the Fisher Scientific Isotemp Basic Ceramic Hotplate: Sleek, compact units offer dependability and value. Fit easily in hood or on benchtop. Easy and safe to use. Excellent for sample drying and general lab heating in environments between 4° to 40°C (39° to 104°F). Easy-to-set analog temperature control knob with graduated scale. LED display. Top plate and base design diverts liquids away from internal electronics. Safety warning system with visual alert protects user from accidental burns. Redundant temperature control systems for overtemperature protection. Incorporated base mount holds support rods up to 13mm diameter—ideal when using thermometers or pH probes. Temperature Range: 30° to 540°C (Ambient to 1004°F). Reflective white ceramic surface is acid- and alkali-resistant and easy to clean. Nonheating frame surrounds the heated ceramic plate for added protection. One year warranty. Includes: Detachable line cord, PTFE stir bar. |
|
|
Fisher Scientific Isotemp Basic Ultralow-Temperature Freezer, Chest, 10 cu. ft. $8236 Features of the Fisher Scientific Isotemp Basic Ultralow-Temperature Freezer: Ideal for a variety of industrial-process and general storage uses. Secure storage for anatomy components, DNA, biological products, viruses, vaccines, and tissue samples. Low-profile design for easy access to contents. Temperature range from -86° to -40°C Manual defrost Heavy-gauge steel exterior with high-impact powder paint finish Heavy-gauge steel interior with rounded corners for easy cleaning Minimum 5 in. thick (12.7cm) foamed-in-place, closed-cell, CFC-free urethane insulation in walls and door protects against high-ambient conditions 1 in. dia. (2.5cm) access port with cap on back Heavy-duty counterbalanced lid has built-in keyed lid lock for security Double-seal lid gaskets and Styrofoam* sublids minimize frost buildup Recessed, heavy-duty swivel casters with two leveling legs Electrical Requirements: 208/240V 60Hz |
|
|
Fisher Scientific Isotemp Basic Ceramic Hotplate, 10 x 10, 120V 60Hz $378.33 Features of the Fisher Scientific Isotemp Basic Ceramic Hotplate: Sleek, compact units offer dependability and value. Fit easily in hood or on benchtop. Easy and safe to use. Excellent for sample drying and general lab heating in environments between 4° to 40°C (39° to 104°F). Easy-to-set analog temperature control knob with graduated scale. LED display. Top plate and base design diverts liquids away from internal electronics. Safety warning system with visual alert protects user from accidental burns. Redundant temperature control systems for overtemperature protection. Incorporated base mount holds support rods up to 13mm diameter—ideal when using thermometers or pH probes. Temperature Range: 30° to 540°C (Ambient to 1004°F). Reflective white ceramic surface is acid- and alkali-resistant and easy to clean. Nonheating frame surrounds the heated ceramic plate for added protection. One year warranty. Includes: Detachable line cord, PTFE stir bar. |
|
|
Fisher Scientific Isotemp Plus Lab Refrigerator, 30 cu. ft, 1 Hinged Door $6844.59 Features of the Fisher Scientific Isotemp Plus Lab Refrigerator: Temperature range from 1° to 12°C (33.8° to 53.6°F) with ±3° average stability; adjustable in °C or °F using interior control. Exterior-mounted 0.5 in. LED display with 0.1° temperature resolution. Automatic defrost. 1 hinged solid lockable door Certifications: UL listed, CSA approved. Warranty: 13 months parts and labor. Interior D x W x H: 27.5" x 30" x 60" (70 x 76 x 152cm). No. of Shelves: 4 full size. Exterior L x W x H: 33.5" x 35" x 85" (85 x 89 x 215cm). Net Weight: 440 lb. (200kg). Electrical Requirements: 115V 60Hz (10/15). Construction: Grey enamel-coated steel cabinets, stainless-steel interiors. Solid doors are hinged, white enamel-coated steel. Grey epoxy-coated steel-wire shelves, adjustable on 1 in. (2.5cm) centers. CFC-free R134A refrigerant and polyurethane insulation. Interior fluorescent lighting with exterior light switch. Keyed ON/OFF power switch. Four adjustable legs ensure cabinets are level on irregular floors (casters provided). |
|
|
Fisher Scientific Isotemp Economy Analog Control Water Bath, Model 102 Shallow Form $869 Features of the Fisher Scientific Isotemp Economy Analog Control Water Bath: Economical, general-purpose water baths are ideal for industrial, clinical, pharmaceutical, and biomedical procedures. Shallow-form Model 102S is perfect for heating samples in microcentrifuge tubes and for other molecular biology procedures. Precise temperature control up to 100°C (212°F). Easy-to-use controls on front panel for full access and safe operation. Dual thermostats guard against thermal runaway; elements won't burn out even if bath runs dry. Hinged see-through acrylic gable covers have unique fins that keep hands away from hot vapors; stay open at 90° position or lift off to accommodate large glassware. Corrosion-resistant exterior with acrylic enamel finish; temperature-resistant plastic rim fits snugly to insulate and prevent leaks. Outside of the bath stays cool to the touch even after hours of operation. Low-profile design makes access convenient. Deep-drawn stainless-steel reservoirs are seamless to prevent leaks; rounded corners make cleaning easy. All models are CSA approved. Product Specifications: Capacity: 2L (1/2 gal.). Maximum, With Lid: 100°C (212°F). Maximum, Without Lid: 70°C (158°F). Uniformity/Stability at 37°C: ±0.2°C. Reservoir L x W x D: 5-7/8 x 11-3/4 x 2-1/2 in. (15 x 30 x 6cm). Overall L x W x H: 10-1/2 x 14-1/2 x 7-5/8 in. (27 x 36 x 19cm). Electrical Requirements: 230V 50/60Hz, 0.8A. Includes: 230V models are supplied with line cord and CE plug. Sample tray, thermometer clip, and nonhazardous-liquid, partial immersion (76mm) thermometer (-10° to +110°C) come with each bath. |
|
|
Fisher Scientific Isotemp Plus Lab Refrigerator, 45.4 cu. ft with Recorder & Alarm $9452 Features of the Fisher Scientific Isotemp Plus Lab Refrigerator: Temperature range from 1° to 12°C (33.8° to 53.6°F) with ±3° average stability; adjustable in °C or °F using interior control. Exterior-mounted 0.5 in. LED display with 0.1° temperature resolution. Capacities from 23.1 to 74 cu. ft. (654 to 2100L). Automatic defrost. 2 sliding glass lockable doors; 115V 60Hz. Construction: White enamel-coated steel cabinets, stainless-steel interiors. Keylocked solid or glass doors. Solid doors are hinged, white enamel-coated steel. Thermopane glass doors (hinged or sliding) provide easy access and visual inventory control. Sliding doors require no swing-out space—a valuable benefit in high traffic or narrow areas. White epoxy-coated steel-wire shelves (14.8 to 44.4 sq. ft.), adjustable on 1 in. (2.5cm) centers. CFC-free R134A refrigerant and polyurethane insulation. Interior fluorescent lighting with exterior light switch. Keyed ON/OFF power switch. Four adjustable legs ensure cabinets are level on irregular floors (casters provided). Alarms: Panel-mounted, factory installed. Digital display with minimum/maximum setpoints, audible alarm, and 24V, 0.5A SPST N.O. relay contacts. Seven-day Selectable Temperature Recorder: Panel-mounted, factory installed. 6 in. dia. (15.2cm) chart. User-selectable temperature ranges. Single-point calibration; individually calibrated against equipment with calibration certified traceable to NIST*. Supplied with 60 charts and 7-day scale. Certifications: UL listed, CSA approved. Warranty: 13 months parts and labor. Interior D x W x H: 27 x 48.5 x 54.5 in. (67 x 123 x 138cm). No. of Shelves: 8 full size. Exterior L x W x H: 31.5 x 52 x 78 in. (80 x 132 x 198cm). Net Weight: 498 lb. (226kg). |
|
|
Fisher Scientific Isotemp 500 Series Economy Lab Oven, 120V 50/60Hz, 6.5A, 1.7 cu. ft. $1042.76 Features of the Fisher Scientific Isotemp 500 Series Economy Lab Oven: Ideal for small drying and sterilizing jobs. Sturdy, reach-in gravity convection ovens are well suited to bacteriological, clinical, educational, and industrial labs on a tight budget. Light enough to move as needed. Includes: Thermometer holder, line cord with grounded plug; 1.7 cu. ft. unit comes with three shelves. Features front-mounted electronic temperature control, red heating cycle indicator, ON/OFF switch, and green power indicator. Continuous temperature uniformity. Built-in backup controller for safety. Double-wall construction of heavy-gauge steel with 1 in. (2.5cm) layer of impregnated fiberglass. Aluminum chamber. Door opens 180°; cool-touch handle and positive dual spring-loaded latches. Warranty: 12 months.Product Specifications: Chamber Volume: 1.7 cu. ft. (48.1L). Temperature range: Ambient +5° to 210°C. Accuracy: ±3°C. Type: Electronic. Uniformity: ±0.5°C. Exterior L x W x H: 13.5 x 18.5 x 22.5 in. (34 x 47 x 57cm). Chamber D x W x H: 11.5 x 16 x 16.25 in. (29 x 41 x 41cm). Shipping Weight: 57 lb. (26kg). Electrical Requirements: 120V 50/60Hz, 6.7A, 800w. |
|
|
Fisher Scientific Isotemp 5.8' Dual Ir Co2 Incub W/rh, 115V $20359 Fisher Scientific Isotemp 5.8' Dual Ir Co2 Incub W/rh, 115V Includes: Tank switcher and switchover indicator; CO2 sample port on front, 1 in. (2.5cm) access port on rear for probes or instrumentation leads; electrical outlet on rear. Choice of CO2 or Three-Gas Models (CO2/O2/N2). Select models include relative-humidity control with operating range to 98% RH. Choose from models with Thermal Conductivity (TC) or Infrared (IR) CO2 sensor. Operating temperature range, 5° above ambient to 60°C; temperature stability, ±0.1°C at 37°C; uniformity, ±0.2°C at 37°C. Operating CO2 range, 0 to 20%; ±0.1% stability; uniformity, ±0.2%. Operating 02 range (Three Gas Incubators only), 0 to 40%; ±0.1% stability; ±0.2%uniformity. Automatic gas shutoff when door is opened; CO2 recovers to 5% in <5 min. after door is open for 1 min. HEPA filter standard. Easy-to-use controls; display is readable from across the lab. Seamless interior; heated outer door with key lock; doors switchable to left or right. Audible and visible alarms for open door, low water and over/undertemperature conditions.Specifications & Ordering Information:Dimensions for single-chamber models:Models with 3.0 cu. ft. capacity: interior measures 18D x 20W x 16 in.H (46 x 51 x 41cm); exterior is 25L x 26W x 30 in.H (64 x 66 x 76cm)Models with 5.8 cu. ft. capacity: interior is 18D x 20W x 28 in.H (46 x 51 x 7cm); exterior is 25L x 26W x 42 in.H (64 x 66 x 107cm).Dimensions for dual-stacked-chamber and dual-side-by-side models models: Height of vertically stacked dual-chamber models, and width of side-by-side dual-chamber models, are approximately double the height and width of their respective single-chamber models. |
|
|
Fisher Scientific Isotemp Ultralow-Temperature Upright Freezer, 17.2 cu. ft., 115V/60Hz $19879 Features of the Fisher Scientific Isotemp Ultralow-Temperature Upright Freezer: Mid-level monitoring and alarm functions. Programmable microprocessor control provides reliable sample protection, superior performance, excellent energy efficiency, and low noise levels. Temperature range: -86° to -50°C. Easy-to-read door-mounted LED with touchpad data entry. Microprocessor Control: Continuously monitors sensors to ensure proper performance. Key-operated main power and alarm switch. Control setpoint in 1°C increments. Temperature deviation or power failure triggers audible/visual alarms. LED shows temperature deviation due to power or temperature failure. Time Delay, Alarm Test, Alarm Reset push-button controls. Clean Filter, Alarm Battery Low and Voltage indicators. Voltage Buck/Boost corrects incoming line voltage. Low Voltage Surge Protection minimizes voltage spikes. Battery backup supplies control panel in case of power failure. Construction: CFC-free refrigerants. 1hp industrial-grade compressors. Downfeed evaporator. Washable condenser filter. Two 1 in. (2.5cm) dia. access ports. Steel cabinet with corrosion-resistant coating. Minimum 5 in. (127mm) CFC-free, foamed-in-place urethane insulation. Built-in key lock (padlock compatible). Outer door gasket seals with five points of sealing contact. Inner doors are high-impact ABS plastic with recessed handles. Stainless-steel interior shelves. Heavy-duty 2 in. (5cm) locking, tandem wheel casters. Warranty: Two years parts and labor. |
|
|
Fisher Scientific Isotemp Digital-Control Water Bath, Model 202, 2L, Acrylic, 120V $655.99 Features of the Fisher Scientific Isotemp Digital-Control Water Bath: Ideal for industrial, clinical, pharmaceutical, or biomedical procedures. Temperature range from ambient to 100°C. Microprocessor PID control. Multiple built-in safety features. Low-profile design for easy access. Certifications: All baths are CSA approved. Warranty: One year. Controller Features: PID control provides ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C. Display shows °C or °F; easy to read from across the room. Safety Features: Low profile and front-panel controls for easier access, safer operation. Dual thermostats guard against thermal runaway. Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors. Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware. Heating elements will not burn out if bath accidentally runs dry. Design Features: Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating. Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals. Exterior stays cool even after hours of operation. Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination. Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier. Model Selection: Shallow-form Model 202S is perfect for heating samples in microcentrifuge tubes and for other molecular-biology procedures. Model 215 features two chambers with separate controls. Models 220 and 228 have movable control panel that mounts on long or short side of bath. Models 210, 215, 220 and 228 include drain pump to empty reservoir. Product Specifications: Hinged acrylic cover. 120V 50/60Hz, 1.7A. Temperature Range, Maximum w/Lid: Ambient to 100°C (212°F). Temperature Accuracy at 37°C: ±0.5°C. Temperature Uniformity at 37°C: ±0.24°C. Temperature Stability at 37°C: ±0.5°C. Temperature Control: PID. Display: Digital. Resolution: ±0.1°C. Capacity: 1/2 gal. (2L). Reservoir L x W x D: 5-1/4 x 5-7/8 x 6 in. (13 x 14.8 x 15cm). Overall L x W x H: 9-7/8 x 10-3/4 x 7-5/8 in. (25 x 27 x 19cm). Shipping Weight: 7-1/4 lb. (3.3kg). |
|
|
Fisher Scientific Isotemp Digital-Control Water Bath, Model 220, 20L, Acrylic, 230V $1481.09 Features of the Fisher Scientific Isotemp Digital-Control Water Bath: Ideal for industrial, clinical, pharmaceutical, or biomedical procedures. Temperature range from ambient to 100°C. Microprocessor PID control. Multiple built-in safety features. Low-profile design for easy access. Certifications: All baths are CSA approved. Warranty: One year. Controller Features: PID control provides ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C. Display shows °C or °F; easy to read from across the room. Safety Features: Low profile and front-panel controls for easier access, safer operation. Dual thermostats guard against thermal runaway. Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors. Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware. Heating elements will not burn out if bath accidentally runs dry. Design Features: Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating. Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals. Exterior stays cool even after hours of operation. Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination. Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier. Model Selection: Shallow-form Model 202S is perfect for heating samples in microcentrifuge tubes and for other molecular-biology procedures. Model 215 features two chambers with separate controls. Models 220 and 228 have movable control panel that mounts on long or short side of bath. Models 210, 215, 220 and 228 include drain pump to empty reservoir. Product Specifications: Hinged acrylic cover. Electrical Requirements: 230V 60Hz, 8.3A. Temperature Range, Maximum w/Lid: Ambient to 100°C (212°F). Temperature Accuracy at 37°C: ±0.5°C. Temperature Uniformity at 37°C: ±0.24°C. Temperature Stability at 37°C: ±0.5°C. Temperature Control: PID. Display: Digital. Resolution: ±0.1°C. Capacity: 5-1/4 gal. (20L). Reservoir L x W x D: 11-3/4 x 19-3/4 x 6 in. (30 x 50 x 15cm). Overall L x W x H: 16-3/8 x 24-3/8 x 8-7/8 in. (42 x 62 x 23cm). Shipping Weight: 22-1/4 lb. (10.1kg). |
|
|
Fisher Scientific Isotemp Digital-Control Water Bath, Model 202, 2L, Stainless Steel, 230V $942 Features of the Fisher Scientific Isotemp Digital-Control Water Bath: Ideal for industrial, clinical, pharmaceutical, or biomedical procedures. Temperature range from ambient to 100°C. Microprocessor PID control. Multiple built-in safety features. Low-profile design for easy access. Certifications: All baths are CSA approved. Warranty: One year. Controller Features: PID control provides ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C. Display shows °C or °F; easy to read from across the room. Safety Features: Low profile and front-panel controls for easier access, safer operation. Dual thermostats guard against thermal runaway. Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors. Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware. Heating elements will not burn out if bath accidentally runs dry. Design Features: Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating. Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals. Exterior stays cool even after hours of operation. Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination. Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier. Model Selection: Shallow-form Model 202S is perfect for heating samples in microcentrifuge tubes and for other molecular-biology procedures. Model 215 features two chambers with separate controls. Models 220 and 228 have movable control panel that mounts on long or short side of bath. Models 210, 215, 220 and 228 include drain pump to empty reservoir. Product Specifications: Hinged stainless-steel cover. Electrical Requirements: 230V 60Hz, 1.7A. Temperature Range, Maximum w/Lid: Ambient to 100°C (212°F). Temperature Accuracy at 37°C: ±0.5°C. Temperature Uniformity at 37°C: ±0.24°C. Temperature Stability at 37°C: ±0.5°C. Temperature Control: PID. Display: Digital. Resolution: ±0.1°C. Capacity: 1/2 gal. (2L). Reservoir L x W x D: 5-1/4 x 5-7/8 x 6 in. (13 x 14.8 x 15cm). Overall L x W x H: 9-7/8 x 10-3/4 x 7-5/8 in. (25 x 27 x 19cm). Shipping Weight: 7-1/4 lb. (3.3kg). |
|
|
Fisher Scientific Isotemp Digital-Control Water Bath, Model 228, 28L, Acrylic, 230V $1848 Features of the Fisher Scientific Isotemp Digital-Control Water Bath: Ideal for industrial, clinical, pharmaceutical, or biomedical procedures. Temperature range from ambient to 100°C. Microprocessor PID control. Multiple built-in safety features. Low-profile design for easy access. Certifications: All baths are CSA approved. Warranty: One year. Controller Features: PID control provides ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C. Display shows °C or °F; easy to read from across the room. Safety Features: Low profile and front-panel controls for easier access, safer operation. Dual thermostats guard against thermal runaway. Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors. Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware. Heating elements will not burn out if bath accidentally runs dry. Design Features: Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating. Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals. Exterior stays cool even after hours of operation. Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination. Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier. Model Selection: Shallow-form Model 202S is perfect for heating samples in microcentrifuge tubes and for other molecular-biology procedures. Model 215 features two chambers with separate controls. Models 220 and 228 have movable control panel that mounts on long or short side of bath. Models 210, 215, 220 and 228 include drain pump to empty reservoir. Product Specifications: Hinged acrylic cover. Electrical Requirements: 230V 60Hz, 8.3A. Temperature Range, Maximum w/Lid: Ambient to 100°C (212°F). Temperature Accuracy at 37°C: ±0.5°C. Temperature Uniformity at 37°C: ±0.24°C. Temperature Stability at 37°C: ±0.5°C. Temperature Control: PID. Display: Digital. Resolution: ±0.1°C. Capacity: 7-3/8 gal. (28L). Reservoir L x W x D: 11-3/4 x 19-3/4 x 8 in. (30 x 50 x 20cm). Overall L x W x H: 16-3/8 x 24-3/8 x 10-7/8 in. (42 x 62 x 28cm). Shipping Weight: 26 lb. (11.8kg). |
|
|
Fisher Scientific Isotemp Digital-Control Water Bath, Model 205, 5L, Stainless Steel, 230V $973 Features of the Fisher Scientific Isotemp Digital-Control Water Bath: Ideal for industrial, clinical, pharmaceutical, or biomedical procedures. Temperature range from ambient to 100°C. Microprocessor PID control. Multiple built-in safety features. Low-profile design for easy access. Certifications: All baths are CSA approved. Warranty: One year. Controller Features: PID control provides ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C. Display shows °C or °F; easy to read from across the room. Safety Features: Low profile and front-panel controls for easier access, safer operation. Dual thermostats guard against thermal runaway. Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors. Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware. Heating elements will not burn out if bath accidentally runs dry. Design Features: Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating. Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals. Exterior stays cool even after hours of operation. Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination. Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier. Model Selection: Shallow-form Model 202S is perfect for heating samples in microcentrifuge tubes and for other molecular-biology procedures. Model 215 features two chambers with separate controls. Models 220 and 228 have movable control panel that mounts on long or short side of bath. Models 210, 215, 220 and 228 include drain pump to empty reservoir. Product Specifications: Hinged stainless-steel cover. Electrical Requirements: 230V 60Hz, 2.5A. Temperature Range, Maximum w/Lid: Ambient to 100°C (212°F). Temperature Accuracy at 37°C: ±0.5°C. Temperature Uniformity at 37°C: ±0.24°C. Temperature Stability at 37°C: ±0.5°C. Temperature Control: PID. Display: Digital. Resolution: ±0.1°C. Capacity: 1-3/8 gal. (5L). Reservoir L x W x D: 5-7/8 x 11-3/4 x 6 in. (14.8 x 30 x 15cm). Overall L x W x H: 10-1/2 x 14-1/8 x 7-5/8 in. (27 x 36 x 19cm). Shipping Weight: 9-7/8 lb. (4.5kg). |
|
|
Fisher Scientific Isotemp Digital-Control Water Bath, Model 202S, Shallow, 2L, SS, 230V $1019.04 Features of the Fisher Scientific Isotemp Digital-Control Water Bath: Ideal for industrial, clinical, pharmaceutical, or biomedical procedures. Temperature range from ambient to 100°C. Microprocessor PID control. Multiple built-in safety features. Low-profile design for easy access. Certifications: All baths are CSA approved. Warranty: One year. Controller Features: PID control provides ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C. Display shows °C or °F; easy to read from across the room. Safety Features: Low profile and front-panel controls for easier access, safer operation. Dual thermostats guard against thermal runaway. Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors. Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware. Heating elements will not burn out if bath accidentally runs dry. Design Features: Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating. Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals. Exterior stays cool even after hours of operation. Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination. Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier. Model Selection: Shallow-form Model 202S is perfect for heating samples in microcentrifuge tubes and for other molecular-biology procedures. Model 215 features two chambers with separate controls. Models 220 and 228 have movable control panel that mounts on long or short side of bath. Models 210, 215, 220 and 228 include drain pump to empty reservoir. Product Specifications: Hinged stainless-steel cover. Electrical Requirements: 230V 60Hz, 1.7A. Temperature Range, Maximum w/Lid: Ambient to 100°C (212°F). Temperature Accuracy at 37°C: ±0.5°C. Temperature Uniformity at 37°C: ±0.24°C. Temperature Stability at 37°C: ±0.5°C. Temperature Control: PID. Display: Digital. Resolution: ±0.1°C. Capacity: 1/2 gal. (2L). Reservoir L x W x D: 5-7/8 x 11-3/4 x 2-1/2 in. (14.8 x 30 x 6cm). Overall L x W x H: 10-1/2 x 14-1/8 x 6-1/4 in. (27 x 36 x 16cm). Shipping Weight: 8-7/8 lb. (4.0kg). |
|
|
Fisher Scientific Isotemp Digital-Control Water Bath, Model 210, 10L, Stainless Steel, 230V $1158.23 Features of the Fisher Scientific Isotemp Digital-Control Water Bath: Ideal for industrial, clinical, pharmaceutical, or biomedical procedures. Temperature range from ambient to 100°C. Microprocessor PID control. Multiple built-in safety features. Low-profile design for easy access. Certifications: All baths are CSA approved. Warranty: One year. Controller Features: PID control provides ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C. Display shows °C or °F; easy to read from across the room. Safety Features: Low profile and front-panel controls for easier access, safer operation. Dual thermostats guard against thermal runaway. Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors. Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware. Heating elements will not burn out if bath accidentally runs dry. Design Features: Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating. Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals. Exterior stays cool even after hours of operation. Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination. Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier. Model Selection: Shallow-form Model 202S is perfect for heating samples in microcentrifuge tubes and for other molecular-biology procedures. Model 215 features two chambers with separate controls. Models 220 and 228 have movable control panel that mounts on long or short side of bath. Models 210, 215, 220 and 228 include drain pump to empty reservoir. Product Specifications: Hinged stainless-steel cover. Electrical Requirements: 230V 60Hz, 5.8A. Temperature Range, Maximum w/Lid: Ambient to 100°C (212°F). Temperature Accuracy at 37°C: ±0.5°C. Temperature Uniformity at 37°C: ±0.24°C. Temperature Stability at 37°C: ±0.5°C. Temperature Control: PID. Display: Digital. Resolution: ±0.1°C. Capacity: 2-5/8 gal. (10L). Reservoir L x W x D: 12-7/8 x 11-3/4 x 6 in. (33 x 30 x 15cm). Overall L x W x H: 16-3/8 x 15-3/8 x 8-7/8 in. (42 x 39 x 23cm). Shipping Weight: 16-1/2 lb. (7.5kg). |
|
|
Fisher Scientific Isotemp Digital-Control Water Bath, Model 228, 28L, Stainless Steel, 230V $1518.3 Features of the Fisher Scientific Isotemp Digital-Control Water Bath: Ideal for industrial, clinical, pharmaceutical, or biomedical procedures. Temperature range from ambient to 100°C. Microprocessor PID control. Multiple built-in safety features. Low-profile design for easy access. Certifications: All baths are CSA approved. Warranty: One year. Controller Features: PID control provides ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C. Display shows °C or °F; easy to read from across the room. Safety Features: Low profile and front-panel controls for easier access, safer operation. Dual thermostats guard against thermal runaway. Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors. Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware. Heating elements will not burn out if bath accidentally runs dry. Design Features: Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating. Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals. Exterior stays cool even after hours of operation. Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination. Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier. Model Selection: Shallow-form Model 202S is perfect for heating samples in microcentrifuge tubes and for other molecular-biology procedures. Model 215 features two chambers with separate controls. Models 220 and 228 have movable control panel that mounts on long or short side of bath. Models 210, 215, 220 and 228 include drain pump to empty reservoir. Product Specifications: Hinged stainless-steel cover. Electrical Requirements: 230V 60Hz, 8.3A. Temperature Range, Maximum w/Lid: Ambient to 100°C (212°F). Temperature Accuracy at 37°C: ±0.5°C. Temperature Uniformity at 37°C: ±0.24°C. Temperature Stability at 37°C: ±0.5°C. Temperature Control: PID. Display: Digital. Resolution: ±0.1°C. Capacity: 7-3/8 gal. (28L). Reservoir L x W x D: 11-3/4 x 19-3/4 x 8 in. (30 x 50 x 20cm). Overall L x W x H: 16-3/8 x 24-3/8 x 10-7/8 in. (42 x 62 x 28cm). Shipping Weight: 26 lb. (11.8kg). |
|
|
Fisher Scientific Isotemp Digital-Control Water Bath, Model 220, 20L, Stainless Steel, 230V $1305.1 Features of the Fisher Scientific Isotemp Digital-Control Water Bath: Ideal for industrial, clinical, pharmaceutical, or biomedical procedures. Temperature range from ambient to 100°C. Microprocessor PID control. Multiple built-in safety features. Low-profile design for easy access. Certifications: All baths are CSA approved. Warranty: One year. Controller Features: PID control provides ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C. Display shows °C or °F; easy to read from across the room. Safety Features: Low profile and front-panel controls for easier access, safer operation. Dual thermostats guard against thermal runaway. Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors. Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware. Heating elements will not burn out if bath accidentally runs dry. Design Features: Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating. Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals. Exterior stays cool even after hours of operation. Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination. Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier. Model Selection: Shallow-form Model 202S is perfect for heating samples in microcentrifuge tubes and for other molecular-biology procedures. Model 215 features two chambers with separate controls. Models 220 and 228 have movable control panel that mounts on long or short side of bath. Models 210, 215, 220 and 228 include drain pump to empty reservoir. Product Specifications: Hinged stainless-steel cover. Electrical Requirements: 230V 60Hz, 8.3A. Temperature Range, Maximum w/Lid: Ambient to 100°C (212°F). Temperature Accuracy at 37°C: ±0.5°C. Temperature Uniformity at 37°C: ±0.24°C. Temperature Stability at 37°C: ±0.5°C. Temperature Control: PID. Display: Digital. Resolution: ±0.1°C. Capacity: 5-1/4 gal. (20L). Reservoir L x W x D: 11-3/4 x 19-3/4 x 6 in. (30 x 50 x 15cm). Overall L x W x H: 16-3/8 x 24-3/8 x 8-7/8 in. (42 x 62 x 23cm). Shipping Weight: 22-1/4 lb. (10.1kg). |
|
|
Fisher Scientific Isotemp Chromatography Refrigerator, 27 cu. ft., 1 Hinged Glass Door, w/ Alarm $7678.05 Fisher Scientific Isotemp Chromatography Refrigerator With Recorder/Alarm Capped 2 in. I.D. (5.1cm) access portholes in each side wall permit the insertion of thermocouples and other wiring without disturbing temperature settings. Push-button lights and circuit breaker-protected duplex electrical receptacles simplify equipment operation and allow observation of ongoing separations. Description Temperature range: 1° to 12°C (33.8° to 53.6°F) Average ±3° temperature stability. Capacities: 27 to 72 cu. ft. (765 to 2039L). Microprocessor temperature set and adjust interior control. Exterior-mounted 1/2 in. LED display with 1° resolution. Automatic defrost. Keyed ON/OFF power switch.Construction Rust-resistant, phosphate-impregnated steel coated with durable baked-on enamel. One, two or three Thermopane glass doors—all with key locks. Hinged or sliding doors provide easy access and visual monitoring. Sliding doors require no swing-out space—a valuable benefit in high traffic or narrow areas. Cam lift on hinged doors locks open at a 95° angle, close with a gentle push. White epoxy, powder-coated steel interiors and stainless-steel floors. White epoxy-coated steel-wire shelves (7.2 to 39 sq.ft.) resist most acids, solvents and chemicals; adjustable on 1 in. (2.5cm) centers 21/2 in. thick (6.4cm) foamed-in-place, CFC-free urethane insulation. Deluxe stainless-steel adjustable legs.Specifications: Condenser Type: Fin and Tube. Compressor: 1/3hp. Defrost: Automatic. Refrigerant: R-134A. Doors: 1 hinged glass. Shelf Area: 7.2 sq. ft. Plug Type: NEMA 5-20P.Dimensions: Interior D x W x H: 28.5 x 27 x 55 in. (72 x 69 x 140cm). No. of Shelves: 1 full, 3 half. Exterior L x W x H" : 35 x 30 x 78 in. (89 x 76 x 198cm). Net Weight"¡: 342 lb. (155kg). Amps/Breaker: 13.5/20. Compliance: UL listed, CSA approved. Warranty: 13 months parts and labor. Service agreement available.Seven-day Selectable Temperature Recorder with Alarm Panel-mounted, factory installed. 6 in. dia. (15.2cm) chart. User-selectable temperature ranges. Single-point calibration; individually calibrated against equipment with calibration certified traceable to NIST. Supplied with 60 charts and 7-day scale. Display with minimum/maximum setpoints, audible alarm, and 24V, 0.5A SPST N.O. relay contacts. reestanding (13-986-160), Standard Remote (13-986-32A) and Deluxe Remote (13-986-100) alarm systems available separately. |
|
|
Fisher Scientific Isotemp Chromatography Refrigerator, 27 cu. ft., 1 Hinged Glass Door $6217.05 Fisher Scientific Isotemp Chromatography Refrigerators Capped 2 in. I.D. (5.1cm) access portholes in each side wall permit the insertion of thermocouples and other wiring without disturbing temperature settings. Push-button lights and circuit breaker-protected duplex electrical receptacles simplify equipment operation and allow observation of ongoing separations. Description Temperature range: 1° to 12°C (33.8° to 53.6°F). Average ±3° temperature stability. Capacities: 27 to 72 cu. ft. (765 to 2039L). Microprocessor temperature set and adjust interior control. Exterior-mounted 1/2 in. LED display with 1° resolution. Automatic defrost. Keyed ON/OFF power switch.Construction Rust-resistant, phosphate-impregnated steel coated with durable baked-on enamel. One, two or three Thermopane glass doors—all with key locks. Hinged or sliding doors provide easy access and visual monitoring. Sliding doors require no swing-out space—a valuable benefit in high traffic or narrow area Cam lift on hinged doors locks open at a 95° angle, close with a gentle push White epoxy, powder-coated steel interiors and stainless-steel floors. White epoxy-coated steel-wire shelves (7.2 to 39 sq.ft.) resist most acids, solvents and chemicals; adjustable on 1 in. (2.5cm) centers21/2 in. thick (6.4cm) foamed-in-place, CFC-free urethane insulation. Deluxe stainless-steel adjustable legs.Specifications: Condenser Type: Fin and Tube. Compressor: 1/3hp. Defrost: Automatic. Refrigerant: R-134A Doors: 1 hinged glass. Shelf Area: 7.2 sq. ft. Plug Type: NEMA 5-20P.Dimensions: Interior D x W x H: 28.5 x 27 x 55 in. (72 x 69 x 140cm). No. of Shelves: 1 full, 3 half. Exterior L x W x H" : 35 x 30 x 78 in. (89 x 76 x 198cm). Net Weight"¡: 342 lb. (155kg). Amps/Breaker: 13.5/20. Compliance: UL listed, CSA approved. Warranty: 13 months parts and labor. Service agreement available. |
|
|
Fisher Scientific Isotemp Chromatography Refrigerator, 38 cu. ft., 2 Glass Sliding Doors $9962.4 Fisher Scientific Isotemp Chromatography Refrigerators Capped 2 in. I.D. (5.1cm) access portholes in each side wall permit the insertion of thermocouples and other wiring without disturbing temperature settings. Push-button lights and circuit breaker-protected duplex electrical receptacles simplify equipment operation and allow observation of ongoing separations. Description Temperature range: 1° to 12°C (33.8° to 53.6°F). Average ±3° temperature stability. Capacities: 27 to 72 cu. ft. (765 to 2039L). Microprocessor temperature set and adjust interior control. Exterior-mounted 1/2 in. LED display with 1° resolution. Automatic defrost. Keyed ON/OFF power switch. Construction Rust-resistant, phosphate-impregnated steel coated with durable baked-on enamel. One, two or three Thermopane glass doors—all with key locks. Hinged or sliding doors provide easy access and visual monitoring. Sliding doors require no swing-out space—a valuable benefit in high traffic or narrow areas. Cam lift on hinged doors locks open at a 95° angle, close with a gentle push. White epoxy, powder-coated steel interiors and stainless-steel floors. White epoxy-coated steel-wire shelves (7.2 to 39 sq.ft.) resist most acids, solvents and chemicals; adjustable on 1 in. (2.5cm) centers 21/2 in. thick (6.4cm) foamed-in-place, CFC-free urethane insulation. Deluxe stainless-steel adjustable legs. Specifications: Condenser Type: Fin and Tube. Compressor: 1/2hp . Defrost: Automatic. Refrigerant: R-134A. Doors: 2 Sliding glass. Shelf Area: 15.2 sq. ft. Plug Type: NEMA 5-20P. Dimensions: Interior D x W x H: 25.5 x 41 x 55 in. (65 x 104 x 140cm). No. of Shelves: 6 full, 2 half. Exterior L x W x H"?: 31.5 x 44 x 78 in. (80 x 112 x 198cm). Net Weight"?: 421 lb. (191kg). Amps/Breaker: 16/20. Compliance: UL listed, CSA approved. Warranty: 13 months parts and labor. Service agreement available. |
|
|
Fisher Scientific Isotemp Digital-Control Water Bath, Model 228, 28L, Acrylic, 120V $1844.09 Features of the Fisher Scientific Isotemp Digital-Control Water Bath: Ideal for industrial, clinical, pharmaceutical, or biomedical procedures. Temperature range from ambient to 100°C. Microprocessor PID control. Multiple built-in safety features. Low-profile design for easy access. Certifications: All baths are CSA approved. Warranty: One year. Controller Features: PID control provides ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C. Display shows °C or °F; easy to read from across the room. Safety Features: Low profile and front-panel controls for easier access, safer operation. Dual thermostats guard against thermal runaway. Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors. Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware. Heating elements will not burn out if bath accidentally runs dry. Design Features: Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating. Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals. Exterior stays cool even after hours of operation. Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination. Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier. Model Selection: Shallow-form Model 202S is perfect for heating samples in microcentrifuge tubes and for other molecular-biology procedures. Model 215 features two chambers with separate controls. Models 220 and 228 have movable control panel that mounts on long or short side of bath. Models 210, 215, 220 and 228 include drain pump to empty reservoir. Product Specifications: Hinged acrylic cover. 120V 50/60Hz, 8.3A. Temperature Range, Maximum w/Lid: Ambient to 100°C (212°F). Temperature Accuracy at 37°C: ±0.5°C. Temperature Uniformity at 37°C: ±0.24°C. Temperature Stability at 37°C: ±0.5°C. Temperature Control: PID. Display: Digital. Resolution: ±0.1°C. Capacity: 7-3/8 gal. (28L). Reservoir L x W x D: 11-3/4 x 19-3/4 x 8 in. (30 x 50 x 20cm). Overall L x W x H: 16-3/8 x 24-3/8 x 10-7/8 in. (42 x 62 x 28cm). Shipping Weight: 26 lb. (11.8kg). |
|
|
Fisher Scientific Isotemp Digital-Control Water Bath, Model 202, 2L, Stainless Steel, 120V $904 Features of the Fisher Scientific Isotemp Digital-Control Water Bath: Ideal for industrial, clinical, pharmaceutical, or biomedical procedures. Temperature range from ambient to 100°C. Microprocessor PID control. Multiple built-in safety features. Low-profile design for easy access. Certifications: All baths are CSA approved. Warranty: One year. Controller Features: PID control provides ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C. Display shows °C or °F; easy to read from across the room. Safety Features: Low profile and front-panel controls for easier access, safer operation. Dual thermostats guard against thermal runaway. Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors. Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware. Heating elements will not burn out if bath accidentally runs dry. Design Features: Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating. Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals. Exterior stays cool even after hours of operation. Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination. Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier. Model Selection: Shallow-form Model 202S is perfect for heating samples in microcentrifuge tubes and for other molecular-biology procedures. Model 215 features two chambers with separate controls. Models 220 and 228 have movable control panel that mounts on long or short side of bath. Models 210, 215, 220 and 228 include drain pump to empty reservoir. Product Specifications: Hinged stainless-steel cover. 120V 50/60Hz, 1.7A. Temperature Range, Maximum w/Lid: Ambient to 100°C (212°F). Temperature Accuracy at 37°C: ±0.5°C. Temperature Uniformity at 37°C: ±0.24°C. Temperature Stability at 37°C: ±0.5°C. Temperature Control: PID. Display: Digital. Resolution: ±0.1°C. Capacity: 1/2 gal. (2L). Reservoir L x W x D: 5-1/4 x 5-7/8 x 6 in. (13 x 14.8 x 15cm). Overall L x W x H: 9-7/8 x 10-3/4 x 7-5/8 in. (25 x 27 x 19cm). Shipping Weight: 7-1/4 lb. (3.3kg). |
|
|
Fisher Scientific Isotemp Digital-Control Water Bath, Model 205, 5L, Stainless Steel, 120V $1143.21 Features of the Fisher Scientific Isotemp Digital-Control Water Bath: Ideal for industrial, clinical, pharmaceutical, or biomedical procedures. Temperature range from ambient to 100°C. Microprocessor PID control. Multiple built-in safety features. Low-profile design for easy access. Certifications: All baths are CSA approved. Warranty: One year. Controller Features: PID control provides ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C. Display shows °C or °F; easy to read from across the room. Safety Features: Low profile and front-panel controls for easier access, safer operation. Dual thermostats guard against thermal runaway. Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors. Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware. Heating elements will not burn out if bath accidentally runs dry. Design Features: Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating. Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals. Exterior stays cool even after hours of operation. Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination. Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier. Model Selection: Shallow-form Model 202S is perfect for heating samples in microcentrifuge tubes and for other molecular-biology procedures. Model 215 features two chambers with separate controls. Models 220 and 228 have movable control panel that mounts on long or short side of bath. Models 210, 215, 220 and 228 include drain pump to empty reservoir. Product Specifications: Hinged stainless-steel cover. 120V 50/60Hz, 2.5A. Temperature Range, Maximum w/Lid: Ambient to 100°C (212°F). Temperature Accuracy at 37°C: ±0.5°C. Temperature Uniformity at 37°C: ±0.24°C. Temperature Stability at 37°C: ±0.5°C. Temperature Control: PID. Display: Digital. Resolution: ±0.1°C. Capacity: 1-3/8 gal. (5L). Reservoir L x W x D: 5-7/8 x 11-3/4 x 6 in. (14.8 x 30 x 15cm). Overall L x W x H: 10-1/2 x 14-1/8 x 7-5/8 in. (27 x 36 x 19cm). Shipping Weight: 9-7/8 lb. (4.5kg). |